Francolin 2.0 White DC Ceiling Fan with ABS Blades and Removable Light

The Francolin 2.0 White DC Ceiling Fan is a pinnacle of modern ceiling fan technology, designed to integrate seamlessly into your home while reducing energy costs and enhancing comfort. This fan features a sleek white finish with ABS blades and includes a removable 12W LED light with 3-step dimming, ideal for various lighting needs. Its 35W DC motor is not only energy-efficient but also operates quietly, making it suitable for any room. The Francolin's advanced features, such as 6-speed remote control and compatibility with UPS and solar systems, ensure it meets all your cooling needs effectively.

Features:

• White DC Ceiling Fan with white ABS Blades
• Light Included: 12W GX53 Daylight 6500K LED Globe with 3 Step Dimming: 15%-50%-100%
• Diameter: 1320mm
• Height: 315mm
• 6 Speed Remote Control and Receiver
• 35W DC Motor
• Suitable Room Size: 4m x 4m
• 2 Year Warranty

Energy Saving:

• The DC motor is the latest technology in fan design. Its highly efficient motor saves
  up to 65% more energy than ceiling fans with traditional AC motors.
• The Francolin DC motor is 35W
• These DC fans are also suitable for use on UPS and Solar systems due to their low energy consumption.

Silent operation:
This DC fan motor is programmed with a stabilized current which efficiently reduces motor noise.

Low Operating Temperature:
The DC power is managed effectively which brings down the motor operating temperature to less than 50?. This results in a much cooler motor than a standard AC fan and increases the longevity of the motor.

Airflow:
The airflow of the fan is 162m³ /min

Angled Ceiling Installation:

• The Francolin can be installed on an angled ceiling.
• The fan hanging system supports a maximum 10-degree angled ceiling installation.
• NOTE: When installing this ceiling fan ensure that the ceiling joist or structure is capable of carrying a load of at least 16kg.

6 Speed Remote Control:

• This DC fan comes with a 6-speed remote, which gives a greater choice of comfort levels.
• The remote control for the Francolin ceiling fan takes 2 x AAA Batteries, to open and to insert the batteries you will need to remove the screw on the back of the remote.
• To test the remote press and hold any button. A red LED light will be lit up at the top of the remote.

The Fan Receiver and Remote Pairing:

NOTE: The pairing of the remote and receiver has been done at the factory. When the ceiling fan is installed, pairing the fan receiver and remote is NOT required. 
Should the remote and receiver lose control after installation or during use, the remote and the receiver must be repaired.
Below are the operating symptoms and method to repair the pairing of the DC ceiling fan remote and receiver.

Issues:

• Loss of control - Fan is only running at high speed after installation.
• Loss of control - No reverse function after installation.
• Loss of control - Remote cannot communicate with the receiver.

Solutions:

• Switch off the main power of the ceiling fan.
• Switch on the main power of the ceiling fan. Press and hold the On/Off button on the remote for 5 seconds within 30 seconds after switching on. There will be a notification ‘beep’ sound from the receiver to indicate that the pairing process is successful.
• Turn on and select the different speed of the ceiling fan to check the operation of the fan.

After Installation:

NOTE: Ceiling fans tend to move during operation due to the fact that they are mounted on a rubber grommet. If the fan is mounted rigidly to the ceiling it will cause excessive vibration.

Movement of a few centimeters is quite acceptable and DOES NOT suggest any problem.

To Reduce the Fan Wobble:
Please check that all screws which fix the mounting bracket and down rod are secure.

Noise:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency signals superimposed in the electricity for off-peak hot water geysers, may cause a change in fan motor noise. This is normal.

Please allow a 24-hour “settling-in” period, most noises associated with a new fan disappear during this time. The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the motor run – All electric motors are audible to some extent.

NOTE: Always turn OFF the power at the mains switch before performing any maintenance or attempting to clean your fan.

Maintenance & Cleaning

• Every 6 months periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.
• Do not soak or immerse your ceiling fan in the water or other liquids. It could damage the motor or the blades and create the possibility of an electrical shock.
• Ensure that the fan does not come in contact with any organic solvents or cleaners.
• To clean the fan blades, wipe with only a dry clean cloth with NO organic solvents or cleaners.
• The motor has a permanently lubricated ball bearing so there is no need to oil.