Goshawk Ceiling Fan with Light and Remote Control

Elevate your home's ambiance and functionality with the Goshawk Ceiling Fan. This ceiling fan not only lowers energy costs but also adds a layer of comfort, style, and beautiful lighting to your spaces. It's designed to complement your home's features and finishes beautifully.

Features:

• Comes without an E27 Globe
• Elegant white metal finish with options for Glass and reversible Teak White Wash or White blades
• Diameter: 1320mm
• Height: 400mm
• Includes a 3-speed remote and receiver (AAA batteries for the remote not included)
• 65W AC motor with a Summer/Winter switch to adjust air flow direction
• Not suitable for coastal conditions
• Optimal for room sizes up to 4m x 4m
• Protected by a 2-year warranty

PLEASE NOTE THE BELOW WHEN PURCHASING MORE THAN ONE REMOTE CONTROL FAN:
When two or more fans are located near each other, you may want to have the remote and the receiver for each fan set to a different code, so that the operation of one fan does not affect the operation of the other fan/s.

Safety checks and special instructions:
Ensure that the receiver is ON prior to pairing the remote with the receiver.

RECEIVER PAIRING FOR CEILING FAN 1:

• Turn OFF both ceiling fans at the mains supply to the receiver
• Install the 2 x 1.5 AAA batteries in the compartment. Please make sure that these have been inserted the correct way.
• Turn ON the power to receiver 1, keep the power OFF to receiver 2 (each ceiling fan must have its own switch so that the ceiling fan that needs to be paired with the receiver will be on)
• Press and hold the power button on remote 1 for 3 seconds
• Turn ON and change the speed of ceiling fan 1 by the remote to check the operation has been successful.

RECEIVER PAIRING FOR CEILING FAN 2:

• Turn OFF both ceiling fans 1 and 2 via the mains supply to the receiver
• Install the 2 x 1.5 AAA batteries in the compartment. Please make sure that the polarity of the battery is correct.
• Turn ON the power to receiver 2, keep the power OFF to receiver 1 (each ceiling fan must have its own switch so that the ceiling fan that needs to be paired with the receiver will be on)
• Press and hold the power button on transmitter 2 for 3 seconds within 60 seconds of switching the power to the receiver of ceiling fan 2
• Turn ON and change the speed of ceiling fan 1 by the transmitter to check the operation has been successful